The smart radiator ventilator
With simple, tool-free installation
The smart
radiator ventilator
With simple, tool-free installation
Lundi - Jeudi: 7:30 – 17:00 (CET)
Vendredi: 7:30 – 14:00 (CET)
+49 931 9708 - 466
The smart
Save up to 22% on energy consumption
SpeedComforts get your room to the right temperature in half the time; set your thermostat 1-2 degrees lower without compromising comfort
SpeedComforts accelerate the transfer of heat from a radiator or convector into a room, and distribute the heat evenly
With SpeedComforts the flow temperature can be lowered to 60 degrees. Your central heating system will then work much more economically
SpeedComforts cost less than 0,32 € for electricity per year
For most radiators and convectors
Standard radiators
Most radiators have two or three panels (type 22 or 33) with a gap of more than 7 cm. The SpeedComfort can be fitted at the bottom of the radiator in the gap between the panels. The magnetic slides will automatically find the iron panels.
Narrow(er) radiators
If you have radiators with less than 7 cm of space between the panels, pull the magnetic slides out of the housing and put them back in place with the magnet facing upwards.
The blocks opposite the magnetic slides now only have a cosmetic function and can be removed.
The SpeedComfort will now hang tightly under the radiator.
Single radiators
If you have a radiator with one panel, pull the magnet slides out of the housing and put them back in place with the magnets facing upwards on one side. With the magnets against the back of the radiator, the SpeedComfort hangs tightly underneath.
Convector of convector ducting
If you have a convector or convector ducting, you will find four feet at the bottom of the housing. Place the feet in the specially-made holes, with the foot in the longitudinal direction. You can place the SpeedComfort both on top of the convector block and below.
How do SpeedComforts work?
1. Universally applicable
SpeedComforts are suitable for almost all radiators and convectors. Thanks to the magnetic slides, they fit almost all radiators.
2. Automatic operation
SpeedComforts have an external thermostat switch. This is placed near the hot water supply using magnets. When the radiator or convector gets to 33 degrees close to the thermostat switch, the fans will turn on automatically and they stop when the temperature of the radiator/convector falls below 25 degrees.
3. Quiet fan
The fans of the SpeedComforts are whisper quiet. Their noise level is less than 20 dB. That is quieter than rustling leaves.
4. Lossless adapter
The adapter supplied is lossless. SpeedComforts are energy-efficient: they consume about 0,32 € per year in electricity.
Fitted in no time at all
SpeedComforts fit universally on most radiators and convectors. You simply click them onto the radiator with the magnets at the bottom or you place them on the convector with the feet from the housing. Then attach the sensor, also with magnets, to the radiator near the hot water supply and place the plug of the adapter in the socket. Now you don't need to do anything else: the smart radiator fan switches itself on and off at the right temperature.
